 |
|
|
|
|
|
|
|
|
 |
|
 |
|
Contact Us
|
|
|
|
|
|
|
|
Morset Sound Development
+47 73915000
Persauneveien 25
7045 Trondheim, Norway
contact@winmls.com
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-
WinMLS 2000 Forum
-
This forum has been retired and will no longer be monitored.
You can find our new forum at www.winmls.com/board.
| | | |
Subject Measuring without Loop-Back
Date
Tue Jul 13 2004 13:17
Author Jens Jørgen Dammerud
(support@winmls.com)
|
|
Here are some suggestions on what to do (with WinMLS 2004):
- I guess it is easier to use analog connectors due to the setup of output channels. Make
sure you send signal to both left and right in the generator setup.
- Try to split the
minijack cable from the output with a mini-jack to phono cable and send the
right signal back to line-in.
- Or you could check if Extigy have some internal signal path (for instance
called Stereo mix) you could route your signal through.
In all cases you use generator and not right channel as reference, and make
sure you use the WinMLS mixer - otherwise you'll have to use the control
panel for Extigy to route your signals. Press the Delay button in the measurement settings window to define your loop back.
Please note that you do not
need a loop-back if you don't need the delay time in your measurement.
|
|
|
Click here for this discussion's index
|
|
|
|
