 |
|
|
|
|
|
|
|
|
 |
|
 |
|
Contact Us
|
|
|
|
|
|
|
|
Morset Sound Development
+47 73915000
Persauneveien 25
7045 Trondheim, Norway
contact@winmls.com
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-
WinMLS 2000 Forum
-
This forum has been retired and will no longer be monitored.
You can find our new forum at www.winmls.com/board.
| | | |
Subject Please attach a measurement
Date
Thu Sep 19 2002 10:31
Author Lars Morset
(morset@winmls.com)
|
|
Dear Mr Balin,
thanks for the interesting report.
>(using 14 bit MLS approx at 350 ms)
You mean sequence order 14, which is 2^14 samples and gives approx 350 ms when the sampling frequency is 48 kHz.
>and sometimes I get a delay of 0 samples which also is not >correct.
> The results are not always the same - sometimes the system > outputs reasonable results and then again these strange
> values as stated above.
We have not tried the RME HDSP Digiface, but the results you report are very strange. You need to attach a measurement for me to evaluate this.
> I am using the standard setups "MasterSetup"
> and "PostprocSetup" as supplied with the software.
And you did not do ANY changes? Please note that WinMLS saves all your changes in a temporary setup "temp.wms", found under the folder "\SetupsMeasurement\Temp". If you could attach this file it would also help me detecting the problem.
> BTW, no problems when using the Toshiba WDM driver for the > built-in audio interface.
Good!
Best,
Lars
|
|
|
Click here for this discussion's index
|
|
|
|
